10 Best HDMI Cable For PS4 in 2026

An HDMI Cable for PS4 should provide a dependable connection between the console and a television, projector, or display without introducing signal problems. A good cable also offers useful headroom for features such as 4K video, HDR, ARC, and immersive audio when paired with compatible equipment and content.

We compared the ten products in this guide by examining their stated HDMI specifications, supported resolutions, bandwidth, gaming features, audio capabilities, cable length, connector construction, and compatibility with the PS4 and other common devices. The list includes short and long options, HDMI 2.0 and HDMI 2.1 models, and multi-packs.

Each review identifies the cable's strongest qualities and practical limitations, helping readers decide which option fits their setup. Our top selections reflect the supplied specifications and customer ratings rather than personal testing, and prices and availability can change at any time.

Top 3 Picks for Best HDMI Cable for PS4

Top 10 Best HDMI Cable for PS4 in 2026 Compared

This side-by-side comparison highlights each cable's length, bandwidth, maximum stated resolution, and most relevant PS4-oriented features. It makes it easier to compare basic 4K cables with certified HDMI 2.1 models, long-run installations, and convenient two-packs.

1. Silkland Certified HDMI 2.1 – Best Overall HDMI Cable for PS4

4.7Editor scoreCheck price on Amazon

Silkland Certified HDMI 2.1

48Gbps ultra-high-speed bandwidth

Up to 4K 144Hz

Official HDMI 2.1 certification

Double-layer braided construction

The Silkland Certified HDMI 2.1 Cable stands out as the most complete general-purpose option in this guide, combining official HDMI 2.1 certification, 48Gbps bandwidth, and a practical 6.6-foot length. Its 4.7 rating reflects strong customer satisfaction, while the unusually extensive feature list gives it an edge for buyers who want more than a basic PS4 connection.

Pros

• Broad high-resolution support
• Verified HDMI 2.1 certification
• Useful gaming and audio features
• Six-foot practical length
• Backwards-compatible design

Cons

• Higher-tier specifications are unnecessary for base PS4
• Braided jacket adds unnecessary bulk

We may earn a commission when you buy through this link, at no additional cost to you.

The cable supports an expansive range of display formats, including 4K at 120Hz and 144Hz, 5K at 90Hz and 120Hz, and 8K at 60Hz. It also lists dynamic HDR, HDCP 2.2 and 2.3, eARC and ARC, DTS:X, and Dolby Atmos support. These capabilities are most relevant when the console, television, game, and sound system are all compatible with the selected format.

Durability is another strength. Silkland describes double-layer fishnet winding, nylon braiding, copper cores, and ferrite magnetic beads designed to support stable signal transmission. The stated customer-care commitment is also reassuring, with the brand saying it aims to resolve concerns within 12 hours. These benefits do not guarantee a better picture on a standard PS4, but they make the cable a durable choice for a shared entertainment system.

The main consideration is unnecessary capability. A standard PS4 cannot take advantage of every high-resolution and refresh-rate mode available on a PS5 or modern PC, so some of this cable's headline features will remain dormant. Even so, the certification, construction, audio support, and 6.6-foot length justify selecting it as the strongest all-around option in the roundup.

Certification and Future Headroom

Official certification is the cable's defining feature, giving buyers a verifiable way to evaluate its advertised HDMI 2.1 performance. The 48Gbps bandwidth and broad backward compatibility also provide ample headroom for a PS4 setup that may later share the same television with newer consoles, streaming devices, or PCs.

Gaming, HDR, and Audio

Support for 4K high-refresh modes, dynamic HDR, VRR-related features, and high-bitrate audio makes this suitable for a broader gaming and home-theater arrangement. Actual output remains limited by the PS4, television, game, and soundbar, so compatible equipment is essential.

Check price on Amazon

We may earn a commission when you buy through this link, at no additional cost to you.

2. Highwings 10K 8K HDMI – Best Value HDMI Cable for PS4

4.7Editor scoreCheck price on Amazon

Highwings 10K 8K HDMI

48Gbps ultra-high-speed bandwidth

Five-foot cable length

Up to 4K 120Hz

Variable refresh rate

The Highwings 10K 8K 4K HDMI Cable delivers an unusually capable specification set without moving into the category of a long-run or premium installation cable. Its 4.7 rating, 48Gbps bandwidth, support for 8K at 60Hz and 4K at 120Hz, and five-foot length make it a practical option for a PS4 positioned near a television.

Pros

• Strong bandwidth specification
• Supports 4K 120Hz
• Compact five-foot length
• Reinforced anti-bending connectors
• One-year replacement support

Cons

• Short for distant television placement
• Fewer advanced audio features listed

We may earn a commission when you buy through this link, at no additional cost to you.

Variable refresh rate support gives it some appeal for modern gaming displays, even though the PS4 itself operates within different limits. The cable is also backward compatible with HDMI 2.0b, 2.0a, and several earlier standards, allowing it to serve as a general-purpose connection for a television, projector, or additional console.

Highwings emphasizes durability through an upgraded anti-bending connector design and military-grade tensile nylon. The company also provides a one-year guarantee with free returns or replacement for qualifying problems and says its support team responds within 13 hours. The product is relatively short at 4.99 feet overall, which is the principal compromise for anyone with a larger entertainment unit.

This is a strong value-oriented choice for a PS4 setup in which the console and television are fairly close together. It provides enough bandwidth for current high-definition gaming and adds useful support for newer display technologies, while the shorter lead and focused feature set keep it simple for everyday use.

Ideal for Compact Entertainment Units

At just under five feet, the Highwings cable is most convenient when the PS4 sits in a nearby shelf, stand, or media cabinet. It avoids excess cable bunching around tightly arranged components and is easier to route than the guide's 15-foot in-wall option.

Modern Bandwidth Without Extra Length

The 48Gbps specification and 4K 120Hz support give this cable more capability than a basic PS4 link requires. That headroom can be useful when the same television accepts signals from newer consoles, streaming boxes, and computers, provided every connected device supports the selected format.

Check price on Amazon

We may earn a commission when you buy through this link, at no additional cost to you.

3. Anker HDMI 2.1 Cable – Best Durable HDMI Cable for PS4

4.7Editor scoreCheck price on Amazon

Anker HDMI 2.1 Cable

Six-foot cable length

48Gbps ultra-high-speed bandwidth

Up to 4K 120Hz

Thousand-bend tested design

The Anker HDMI 2.1 Cable is a balanced six-foot option for PS4 owners who prioritize a straightforward connection, strong specifications, and a stated durability target. It carries a 4.7 rating, supports up to 48Gbps of bandwidth, and handles 8K at 60Hz along with 4K at 120Hz and 60Hz.

Pros

• Recognizable established brand
• Six-foot versatile length
• Rated for 1,000 bends
• Broad device compatibility
• Eighteen-month warranty

Cons

• Only 4K 120Hz highlighted
• Advanced audio modes not emphasized

We may earn a commission when you buy through this link, at no additional cost to you.

Its most persuasive practical feature is the rated ability to withstand up to 1,000 bends. That makes it a sensible selection for setups where the cable is routinely moved, plugged and unplugged, or routed around a media console. The six-foot length also provides enough reach for many entertainment systems without the bulk of a very long cable.

The included package is straightforward: one six-foot 8K HDMI cable, a welcome guide, and an 18-month warranty. Anker also states that the cable can connect tablets, laptops, projectors, desktop screens, and other HDMI devices, making it versatile beyond the PS4. Its listed product information does not emphasize eARC, object-based audio formats, or the broadest collection of gaming standards found in some rivals.

For a buyer who wants a six-foot cable from a familiar electronics brand and values a clear bend-resistance claim, this is an excellent middle-ground recommendation. It is particularly suitable for a PS4 living-room setup, while the 48Gbps bandwidth provides more than enough capacity for the console's practical requirements.

Built for Regular Handling

A stated 1,000-bend endurance is useful for cables that move between a wall-mounted television and a console shelf. It offers a measurable construction standard without relying on vague claims about lifespan or performance.

Simple Six-Foot Setup

The length fits many living-room arrangements and leaves room for modest cable management. Buyers should compare the route from the PS4 to the television and allow enough slack to connect the cable without sharply bending either connector.

Check price on Amazon

We may earn a commission when you buy through this link, at no additional cost to you.

4. Highwings HDMI 2.0 – Best 4K HDMI Cable for PS4

4.7Editor scoreCheck price on Amazon

Highwings HDMI 2.0

6.6-foot braided cable

Up to 4K 60Hz

Gold-plated connectors

ARC and 3D support

The Highwings HDMI 2.0 Cable is a focused 4K solution for a standard PS4 installation. Its 4.7 rating, HDMI 2.0 compliance, 4K UHD support, 6.6-foot braided construction, and broad device compatibility make it an easy recommendation for viewers whose priorities are reliable video and everyday console use.

Pros

• Well suited to PS4 use
• Supports 4K 60Hz
• Wide backward compatibility
• Tested for 15,000 bends
• Six-foot-plus roomy length

Cons

• Does not offer HDMI 2.1 bandwidth
• No 4K high-refresh-rate support

We may earn a commission when you buy through this link, at no additional cost to you.

Gold-plated connectors are specified for high-speed, interference-free signal transmission, while the plug-and-play design requires no drivers or software. The cable supports 4K at 3840 by 2160 resolution, stereo audio, 3D, and HDCP 2.2. It is also backward compatible with HDMI 1.4, 1.3, and 1.2 equipment.

Highwings highlights an SR joint design intended to protect the connection points and reports laboratory testing to more than 15,000 bends without performance loss. Component inspection is also part of its stated quality process. These features make the cable a sensible choice for frequent connection changes or a permanent entertainment-center installation.

Its limitation is bandwidth. HDMI 2.0 does not provide the 48Gbps capacity or high-refresh 4K modes associated with the HDMI 2.1 options in this guide. That does not prevent it from serving a PS4 well, but it makes it less future-facing. Choose it when a dependable 4K connection and durable 6.6-foot length matter more than support for the newest gaming specifications.

Purpose-Built 4K Connection

The cable's stated 4K and 18Gbps-class HDMI 2.0 capabilities align closely with the needs of a standard PS4 connected to a modern television. It provides ample room for 4K streaming and supported console output without paying for unused high-refresh capabilities.

Reinforced Connections for Daily Use

The protected joint design and stated bend testing suggest a cable intended to withstand regular handling. That is particularly helpful behind entertainment centers, where connectors may remain plugged in under pressure and sharp bends.

Check price on Amazon

We may earn a commission when you buy through this link, at no additional cost to you.

5. Acer HDMI 2.1 Cable – Best Versatile HDMI Cable for PS4

4.7Editor scoreCheck price on Amazon

Acer HDMI 2.1 Cable

6.6-foot braided cable

48Gbps ultra-high-speed bandwidth

Up to 4K 240Hz

eARC and Dolby Vision

The Acer HDMI 2.1 Cable combines 48Gbps bandwidth, a 6.6-foot braided design, and unusually broad support for high-resolution gaming and modern audio. With a 4.7 rating, it is a strong all-around option for a PS4 setup that also includes a soundbar, projector, streaming device, or newer console.

Pros

• Extensive format support
• eARC and immersive audio
• High-purity copper core
• Broad device compatibility
• Multiple length options

Cons

• Several features exceed PS4 needs
• No certification is claimed

We may earn a commission when you buy through this link, at no additional cost to you.

Its specifications include 8K at 60Hz and 4K at 240Hz, 120Hz, and 144Hz, along with backward support for 4K at 60Hz, 2K, and 1080p. For gaming, it lists VRR support, while the audio section includes eARC, ARC, Dolby Vision, and Dolby Atmos when the connected equipment is compatible.

Construction details include a high-purity copper core, aluminum alloy shell, and braided jacket intended to resist electromagnetic interference, bending, and daily wear. Acer also explicitly identifies the PS4 as a compatible device alongside the PS5, Xbox, Roku, Fire TV, Apple TV, PCs, projectors, and 8K and 4K televisions.

Because the PS4 cannot exploit every advertised mode, the strongest reason to choose this cable is the flexibility it provides for the rest of an entertainment system. It does not state official HDMI certification in the supplied details, but its combination of stated specifications, construction, and compatibility makes it a compelling option for buyers who want one cable to serve many devices.

One Cable for Multiple Entertainment Devices

Explicit compatibility with consoles, streaming devices, computers, projectors, soundbars, and displays gives this cable a wider role than a basic PS4 lead. A buyer who anticipates adding or swapping components can use the same 48Gbps connection without changing cable types.

Modern Audio and Video

eARC, ARC, Dolby Vision, and Dolby Atmos support are useful for a television and soundbar arrangement where the PS4 supplies the game signal. The television and soundbar must support the selected audio return feature, and content must be encoded accordingly.

Check price on Amazon

We may earn a commission when you buy through this link, at no additional cost to you.

6. UGREEN 8K HDMI 2.1 – Best Premium HDMI Cable for PS4

4.8Editor scoreCheck price on Amazon

UGREEN 8K HDMI 2.1

48Gbps certified ultra-high-speed

6.6-foot braided cable

Up to 4K 240Hz

Dynamic HDR and eARC

The UGREEN 8K HDMI 2.1 Cable is the premium selection in this guide, combining official HDMI 2.1 certification, 48Gbps bandwidth, a 6.6-foot braided jacket, and an extensive feature set. Its 4.8 customer rating is the highest among the ten products and reinforces its position as a leading overall choice.

Pros

• Highest listed customer rating
• Official HDMI 2.1 certification
• Comprehensive gaming features
• Strong audio and HDR support
• Robust aluminum connector shells

Cons

• Premium capabilities exceed basic PS4 use
• Fixed 6.6-foot length

We may earn a commission when you buy through this link, at no additional cost to you.

Resolution support reaches 10K and 8K at 60Hz, as well as 4K at 240Hz. The cable also lists variable refresh rates, quick frame transport, auto low-latency mode, quick media switching, Dynamic HDR, 12-bit color, HDCP 2.3 and 2.2, Ethernet, and 3D. These are meaningful additions for a shared setup that may include a PS5, Xbox, gaming PC, or projector.

For audio, eARC is listed alongside Dolby Atmos, DTS:X, and other high-bitrate formats. That makes the cable suitable for connecting a television to compatible soundbars or receivers while also carrying a console's video signal. Its aluminum alloy shells, nickel-plated connectors, and nylon braid are intended to improve bending resistance while preserving flexibility.

UGREEN explicitly lists PS4 and PS4 Pro among compatible devices. While the base PS4 will not use the full 4K 240Hz capability, this is still an excellent choice when the goal is one premium, future-facing cable for a broad entertainment system. Its certification, high rating, and extensive compatibility make it the most premium-focused recommendation here.

Verified 48Gbps Performance

Official HDMI 2.1 certification provides a clear basis for the cable's performance claims. Buyers can scan the QR code with the stated scanner app to verify certification, adding a layer of confidence that generic specifications alone may not provide.

A Complete Home Entertainment Link

The combination of high-resolution support, gaming latency features, Dynamic HDR, and eARC makes this more than a simple console lead. It can serve as the central connection for a television, soundbar, PS4, and several other source devices, subject to their individual specifications.

Check price on Amazon

We may earn a commission when you buy through this link, at no additional cost to you.

7. Amazon Basics HDMI 2-Pack – Best Basic HDMI Cable for PS4

4.7Editor scoreCheck price on Amazon

Amazon Basics HDMI 2-Pack

Two three-foot cables

Up to 4K 60Hz

18Gbps maximum bandwidth

ARC and Ethernet support

The Amazon Basics HDMI Cable two-pack is a practical basic option for PS4 owners who want an inexpensive spare or prefer a short, uncomplicated connection. Its 4.7 rating, inclusion of two three-foot cables, and support for 4K at 60Hz make it especially useful for tightly arranged entertainment setups.

Pros

• Two cables included
• Simple three-foot length
• Direct PS4 compatibility
• Supports 4K 60Hz
• Ethernet and ARC included

Cons

• Only 3K 60Hz maximum output
• Short for distant components

We may earn a commission when you buy through this link, at no additional cost to you.

Each cable uses HDMI A Male to A Male connectors and supports 2160p video at 60Hz, 48-bit color depth, bandwidth up to 18Gbps, Ethernet, 3D, and ARC. The listed device compatibility explicitly includes PS4 and PS3, along with Blu-ray players, Fire TV, Apple TV, Xbox systems, computers, televisions, displays, and receivers.

The two-pack is more valuable than a single lead in several practical ways. One cable can serve the PS4 while the second connects a streaming device, game console, Blu-ray player, or computer. It also provides a replacement if the original cable is damaged or if different devices occupy separate HDMI inputs. A note in the product information makes the ceiling clear: the cable cannot properly handle an output above 4K at 60Hz.

This is the most straightforward budget choice for a standard PS4 installation. It is ideal when the console is close to the television, the setup does not require high-refresh 4K, and the practical benefit of owning two dependable cables outweighs the advanced specifications offered by premium alternatives.

Useful Two-Cable Configuration

The second cable can be reserved for another game system, streaming stick, Blu-ray player, or laptop. This is particularly handy in setups where cables are routinely moved between devices or where a dedicated backup reduces interruptions.

Know the 4K Limit

The explicit 4K at 60Hz ceiling is acceptable for a standard PS4-focused arrangement but matters when a newer console or gaming PC is connected to the same television. Check the output of every intended source before relying on this cable for higher modes.

Check price on Amazon

We may earn a commission when you buy through this link, at no additional cost to you.

8. Highwings 15FT HDMI 2.1 – Best Long HDMI Cable for PS4

4.5Editor scoreCheck price on Amazon

Highwings 15FT HDMI 2.1

15-foot in-wall cable

48Gbps ultra-high-speed bandwidth

Up to 4K 144Hz

CL3 fire-rating designation

The Highwings 15FT HDMI 2.1 Cable is the clear choice when the PS4 and television are far apart or when a cable must run through a wall. It combines 48Gbps bandwidth, an in-wall-friendly CL3 rating, support for 8K at 60Hz and 4K at 120Hz or 144Hz, and a lengthy 15-foot run.

Pros

• Generous 15-foot reach
• Suitable for in-wall routing
• 48Gbps bandwidth
• Dynamic HDR and VRR
• Bidirectional transmission

Cons

• Lowest rating in the roundup
• Excess length can be inconvenient

We may earn a commission when you buy through this link, at no additional cost to you.

Gaming-oriented features include VRR, while Dynamic HDR, 3D, eARC, and HDCP 2.2 compatibility broaden its entertainment role. Highwings also lists DTS Master, DTS:X, Dolby Atmos, and bidirectional transmission. The television, console, game, and audio equipment must all support the relevant features for the complete setup to function as intended.

The cable uses copper wire technology, which Highwings says improves bandwidth carrying capacity, interference resistance, and signal attenuation. Its CL3 designation makes it a more relevant option for permanent in-wall installation than a conventional unrated consumer patch cable. The company also provides lifetime support and states that customer service responds within 13 hours.

Its 4.5 rating is the lowest among the products, although it remains a solid score. The extra length is the central trade-off: it solves reach problems but can be unnecessary for a close setup. Choose this cable for long runs, structured installations, or flexible room layouts rather than simply buying it because it carries the highest-resolution specifications.

Designed for Longer Installs

Fifteen feet of reach makes the cable useful when the PS4 is in a separate cabinet, entertainment room, or other part of the room. The stated CL3 rating adds relevance for routing through a wall, although local building and electrical requirements should be checked before installation.

High-Speed Features for Shared Systems

The 48Gbps bandwidth, Dynamic HDR, VRR, and eARC support make the long cable useful across multiple modern devices. Its capabilities extend well beyond the PS4, so it can remain in a system as new consoles, streaming boxes, or PCs are added.

Check price on Amazon

We may earn a commission when you buy through this link, at no additional cost to you.

9. 6FT 18Gbps HDMI Cable – Best Universal HDMI Cable for PS4

4.6Editor scoreCheck price on Amazon

6FT 18Gbps HDMI Cable

Six-foot standard length

18Gbps maximum bandwidth

Up to 4K 60Hz

ARC and Ethernet support

The 6FT HDMI Cable is a uncomplicated, general-purpose connection for a PS4 and a wide range of other devices. Its 4.6 rating, six-foot length, 18Gbps bandwidth, and support for 4K at 60Hz make it a sensible option for buyers who want more reach than a three-foot cable without the complexity of a high-end specification list.

Pros

• Useful six-foot length
• Clear 4K 60Hz support
• Broad console compatibility
• ARC and Ethernet functions
• Works across many device types

Cons

• No HDMI 2.1 capabilities
• Limited high-refresh format support

We may earn a commission when you buy through this link, at no additional cost to you.

The cable supports HDMI A Male to A Male connections, Ethernet, 3D, 4K video, and ARC. Compatibility is broad, covering the PS5, PS4, PS3, Xbox One, Xbox 360, Blu-ray players, Fire TV, Apple TV, computers, televisions, displays, and A/V receivers. Its stated HDMI standards include 2160p at 60Hz and 48-bit color depth.

The Ethernet function allows compatible HDMI devices to share an internet connection without a separate Ethernet cable, while ARC provides a convenient way to handle television audio. These features make the cable useful for a mixed entertainment system even though it does not advertise the advanced gaming modes found in HDMI 2.1 alternatives.

This product is best for straightforward setups where dependable 4K at 60Hz is enough. Its six-foot length accommodates most furniture arrangements, and its compatibility list reduces the need to research basic device support. Buyers should choose a higher-bandwidth cable instead if they plan to use a new console or PC at 4K high-refresh rates.

A Balanced Cable Length

Six feet is long enough for most PS4 stands and entertainment cabinets while remaining easy to hide. It also gives installers more flexibility than the guide's three-foot options without introducing the bulk associated with a 15-foot run.

Useful Everyday Functions

ARC, Ethernet, 3D, and 4K support cover the features most commonly requested in a basic home-entertainment cable. They are straightforward additions that improve flexibility when the television and source devices offer matching support.

Check price on Amazon

We may earn a commission when you buy through this link, at no additional cost to you.

10. Ubluker Certified HDMI 2.1 – Best Feature-Rich HDMI Cable for PS4

4.7Editor scoreCheck price on Amazon

Ubluker Certified HDMI 2.1

6.6-foot ultra-high-speed cable

48Gbps maximum bandwidth

Up to 4K 240Hz

Official HDMI certification

The Ubluker 10K 8K 4K HDMI Cable rounds out the guide as a feature-rich certified option. Its 4.7 rating, 48Gbps bandwidth, 6.6-foot length, official HDMI certification, and support for resolutions as high as 10K make it a capable choice for a PS4-centered entertainment system.

Pros

• Official HDMI certification label
• Exceptionally broad feature list
• Supports latest gaming standards
• Extensive audio format support
• Wide device compatibility

Cons

• Most features exceed PS4 capabilities
• Specification-heavy for basic setups

We may earn a commission when you buy through this link, at no additional cost to you.

Its listed features are particularly comprehensive, including ALLM, VRR, QMS, QFT, Dynamic HDR, HDR10+, CEC, HDCP 2.2 and 2.3, and VESA DSC 1.2a. Resolution support includes 10K at 60Hz, 8K at 60Hz, 5K at 144Hz, 4K at 240Hz, and lower formats down to 480p. This gives it substantial headroom for current and future high-end displays.

The audio section includes eARC, ARC, DTS Master, DTS:X, Dolby TrueHD, Dolby Vision, and Dolby Atmos. Compatibility extends across gaming PCs, FreeSync and G-SYNC systems, GeForce RTX 30- and 40-series graphics cards, soundbars, PS5, PS4, PS3, Xbox Series X and S, Apple TV, OLED televisions, MacBook laptops, projectors, and monitors.

For a PS4 buyer, this cable offers far more than the console can use, but that is not necessarily a drawback. A single capable lead can serve several source devices and become part of a more capable television and audio setup. The certified construction, broad feature set, and strong rating make it a persuasive premium alternative, especially for owners who regularly connect newer hardware.

Certification Backed Feature Set

The official HDMI certification label gives context to the long list of supported technologies. Buyers seeking the newest gaming, refresh-rate, HDR, and media-switching features have a clearly described cable specification at hand.

One Lead for Many Source Devices

The compatibility list spans older and newer consoles, PCs, streaming platforms, displays, projectors, and audio equipment. A PS4 owner who expects to add a PS5, gaming PC, or modern streaming device can benefit from the cable's remaining headroom.

Check price on Amazon

We may earn a commission when you buy through this link, at no additional cost to you.

Buying Guide – How to Choose the Best HDMI Cable for PS4

Choosing an HDMI Cable for PS4 starts with the capabilities of the console, television, sound system, and intended placement. Resolution, refresh rate, HDR, audio return, cable length, and construction should be considered together so the finished setup is compatible and easy to route.

Resolution and Refresh Rate

Begin with the highest video mode your PS4, television, and selected game can actually deliver. Basic HDMI 2.0 products in this guide support 4K at 60Hz, while HDMI 2.1 cables advertise higher combinations such as 4K at 120Hz, 144Hz, or 240Hz. A cable can preserve a supported signal, but it cannot make a PS4 generate a higher resolution or refresh rate than the console and content allow.

Match the cable to the actual source and display rather than choosing solely by the largest number in the listing. For a standard PS4-focused installation, 4K at 60Hz support is generally the relevant target. If the same television will later receive a PS5, Xbox Series, or high-end PC, an HDMI 2.1 cable with 48Gbps bandwidth provides a useful upgrade path.

HDMI 2.1 Certification

An HDMI 2.1 cable is described as Ultra High Speed, but terminology alone does not prove certification. Some products in this guide specifically state that they passed official HDMI 2.1 certification and provide a way to verify the cable. Certification gives buyers a clearer standard for bandwidth and advertised feature support than a generic label such as 8K HDMI cable.

For a basic PS4, certification is optional rather than essential. For a mixed system that includes a PS5, modern gaming PC, or a television supporting high-refresh 4K, a certified cable such as the UGREEN or Silkland model is a more defensible choice. Check the certification details and device compatibility before making the final selection.

Cable Length and Routing

Measure the path from the PS4 to the television rather than estimating by furniture dimensions. A three-foot cable is convenient for tightly grouped components, while a six- or 6.6-foot lead provides more placement freedom. The 15-foot Highwings option is intended for separated equipment, larger rooms, or in-wall routing, and its CL3 rating adds relevance to that installation type.

Choose enough length to connect without strain but not so much that the cable is forced into a tight coil. Excessive excess length can make management difficult behind a television stand. Also consider whether the cable must cross furniture, pass through walls, or run around corners without creating strain at either connector.

HDR, ARC, and Audio

HDR support can improve the presentation of compatible games and streaming content, but every device in the chain must support the same HDR format. ARC and eARC are also system-level features. The television, soundbar or receiver, and source device must be compatible, and the selected cable must support the required audio-return path.

For a PS4 connected directly to television speakers, these extra features may have limited visible effect. They become more valuable when a soundbar or receiver is part of the system. High-end cables in this guide add Dolby Atmos, DTS:X, Dolby TrueHD, and other formats, so check the soundbar's supported formats before selecting a cable based primarily on audio specifications.

Gaming Features and Latency

VRR, ALLM, QFT, and other gaming-oriented features are most meaningful with a newer console or PC and a compatible display. The PS4 does not benefit from every one of these modes listed on HDMI 2.1 cables. A cable with broad support can still be worthwhile if the television is shared with newer systems, since it gives those devices more options.

Do not expect a cable to lower input lag in every setup. Stable signal delivery, matching supported refresh rates, and correctly configured display settings matter more than a long list of acronyms. When a TV supports VRR, both the source and cable need to support the relevant standard, and the game must be presented at a compatible frame rate.

Build Quality and Connectors

Braided jackets, reinforced connector housings, and metalized shells can improve resistance to everyday bending and wear. Product details in this guide include claims such as 1,000 bends for the Anker cable and more than 15,000 bends for the Highwings HDMI 2.0 model. These figures provide a useful comparison, but buyers should still handle the cable without creating tight bends near the plugs.

A good connector also matters at the television, where space may be limited and the cable may remain under pressure from another device. Look for a clear strain-relief design and a diameter that can fit the television's HDMI input without forcing the plug sideways. A braided jacket is useful, but it is not the only indicator of reliable signal transmission.

Backwards Compatibility

Every cable in this roundup is intended to work with the PS4, and most list compatibility with a wide range of televisions, projectors, receivers, game consoles, streaming devices, and computers. Backwards compatibility is particularly useful when an older game console or Blu-ray player shares the same television and cable arrangement.

Check whether the product's compatibility list includes the specific devices you own rather than relying on a broad statement. Also confirm the relevant output format. A cable can be physically compatible with a PS4 while lacking a higher mode required by another device in the same setup.

Value and Included Accessories

Value is determined by more than the lowest purchase cost. A two-pack can be more economical per connection when it includes a spare, and a longer cable can prevent the need for an extension or inconvenient rerouting. A premium HDMI 2.1 model may cost more but provide certification, advanced features, and a single connection suitable for several modern devices.

Compare the complete package, stated warranty, customer-support provisions, length, and compatibility against your actual needs. Avoid paying for capabilities that will never be used if a straightforward 4K 60Hz cable meets the requirements of the PS4 and television. Evaluate current cost and availability at the time of purchase because both can change.

How to Use and Care for Your HDMI Cable for PS4

Start by checking the HDMI input on the television and the output on the PS4. Turn both devices off before connecting a new cable, align the connector with the port, and insert it firmly without twisting. Connect the other end to the television, then power on the console and select the corresponding HDMI input through the television's source menu.

For a soundbar or A/V receiver, connect the source devices to the receiver or soundbar as required and use the compatible ARC or eARC connection for television audio return. The exact arrangement depends on the equipment. Once the setup is active, confirm the displayed resolution, frame-rate information, HDR status, and audio output in the relevant television or console menus.

Route the cable without creating sharp bends, crushing it behind furniture, or wrapping it tightly around itself. Keep the connector straight where it enters the television and avoid hanging weight from the plug. Periodically inspect exposed sections for damage, and disconnect it by gripping the connector rather than pulling the cable. If the image flickers or disappears, test the connection and input before assuming the cable itself has failed.

Frequently Asked Questions

Final Thoughts on Choosing the Best HDMI Cable for PS4

Related guides

• 10 Best Parabolic WiFi Antenna (November 2026) Expert Guide
• 10 Best Reflective Window Tint (November 2026) Expert Guide
• 10 Best Portable Range Hood (November 2026) Expert Guide
• 10 Best Bluetooth Radio for Car (November 2026) Expert Guide